Tel: +86-532-83178278
Home > News > Content

Float Glass More Good Transparency, Clarity, Purity

The molding process of the float glass is carried out in the tin bath into the protective gas (N2 and H2). As the thickness of the uniformity is better, the transparency of its products is relatively strong, so after the tin surface treatment, relatively smooth, it is one of the most popular building materials.

First, it is in the tin tank, the glass floating on the surface of tin liquid out. Therefore, this glass is first flat and good, no water ripples. For the mirror, car glass. Do not face, do not take shape, it is a major advantage.

The second is the float glass selection of ore quartz sand, good raw materials. Produced by the glass pure, transparent and good. Bright, colorless. No glass boil, bubbles and the like.

Third, is the structure of close, heavy, feel smooth, the same thickness per square meter than the plate than the big, good cutting, easy to break.

The molding process of the float glass is carried out in the tin bath into the protective gas (N and H). The molten glass flows continuously from the cell kiln and floats on the surface of the tin liquid with relatively large density. Under the action of gravity and surface tension, the molten glass is spread on the tin liquid surface and flattened to form the upper and lower surfaces, harden and cool After being cited on the transition roller table. Roller table roller rotation, the glass out of the tin into the annealing furnace into the furnace, the annealing, cutting, to get the float glass products. Float and other molding methods, the advantages are: suitable for high-quality manufacturing of high quality flat glass, such as no wave tendons, uniform thickness, the upper and lower surface smooth, parallel to each other; the scale of the production line is not limited by the forming method, Low cost; high utilization of finished products; easy scientific management and full mechanization, automation, high labor productivity; continuous operation cycle can be up to several years, is conducive to stable production; for the production of some new varieties to provide suitable conditions, such as Electric float glass, annealed spray glass, cold end surface treatment

For the float glass, the thickness of the uniformity is better, the transparency of its products is relatively strong, so after the tin surface treatment, relatively smooth, in the smooth role of the flame and polishing under the action of the formation of a surface Neat, flatness is better, the optical performance of the relatively strong glass, this float glass is particularly good decorative characteristics, but also has good transparency, clarity, purity, and indoor light and other characteristics of light, wide field of vision Performance, but also with the construction of doors and windows, natural lighting materials, the best choice for materials, it is one of the most widely used building materials, it can be said that in the architectural glass of various types of view, this float glass application of the largest , Is one of the most important original pieces of glass deep processing. Ultra-white float glass to clarity of transparency as the main characteristics of the best.